1. These resin parameters have been determined with a temperature of 25°C and a relative humidity of 75%. A test print was performed in a well-ventilated indoor space.
2. These settings were tested using the Phrozen RP Tester (download here) set hyperline. Adjust as needed based on your actual print requirements.
3. Saturn 4 Ultra 16K is only able to read CTB files by Chitubox1.9.6 or above. You may also use any other slicing software if you prefer to do so.
4. If your prints fail to stick to the build plate, try increasing the bottom layer exposure time, switching to standard print mode, and performing manual leveling.

1. 這些樹脂參數是在溫度 25°C、相對濕度 75% 的條件下測定，測試列印於通風良好的室內空間進行。 
2. 本參數使用 Phrozen RP Tester 進行實測（下載請點此） set hyperline 。可根據您的實際列印需求進行調整。 
3. Saturn 4 Ultra 16K 僅能讀取 Chitubox 1.9.6 或以上版本匯出的 CTB 檔案，您也可以使用其他切片軟體。 
4. 如果列印件無法附著在成型平台上，請嘗試增加底層曝光時間、切換至標準列印模式，並進行手動校正。