1. These resin parameters have been determined with a temperature of 25°C and relative humidity of 75%. A test print was performed in a well-ventilated indoor space.
2. We used the Phrozen_XP_finder.stl (Download here) test print file to determine these resin parameters. Please use this STL file to test out the resin parameters before you begin printing. To learn more about how to dial in any resin with an XP_finder.
3. Phrozen Sonic Mighty 8K can only read CTB files by Chitubox or Lychee. You may also use any other slicing software if you prefer to do so.
4. If your prints fail to stick onto the building plate, try increasing the bottom layer exposure time or check out our Help Center.

1. 這些樹脂參數係於 25°C、相對濕度 75% 的環境下測得，所有測試列印皆於通風良好的室內空間進行。 
2. 我們使用 Phrozen_XP_finder.stl 測試檔案（點此下載）來驗證並微調樹脂的曝光參數。強烈建議您在正式列印前先進行一次測試，以優化列印設定。如需進一步了解如何使用 XP_finder 微調任意樹脂，請參考我們的詳細教學。 
3. Phrozen Sonic Mighty 8K 僅支援讀取由 Chitubox 或 Lychee 輸出的 CTB 檔案，您也可依個人喜好選擇使用其他切層軟體。 
4. 若您的列印件無法順利附著於平台，建議嘗試延長底層曝光時間，或前往我們的說明中心查詢相關資訊。